|
|
|
|
|
|
Page: 1 2  |
|
New Arrivals
 Skunk2 introduces its new series of composite fuel rails. Skunk2’s new composite components are made using a proprietary casting process, from a carbon reinforced aerospace thermo-polymer composite that is 33% lighter, 60% stronger, and runs up to 100ºF cooler than aluminum. Keeping the air and fuel cooler results in a significant increase in horsepower and torque. This composite is also chemical resistant to all types of fuels including alcohol. |
 The 2008 Mugen Catalog has finally arrived! Packed full of very cool Mugen products as well as amazing photography of Honda and Mugen vehicles.
The $5.00 price will be applied to your next order with us. |
 A Spec Racing is proud to release their own 24mm rear sway bar. Anoidized dark grey finish and includes show quality aluminum brackets with hardened polyurethane bushing. Perfect to go with your ASR subframe brace!! |
 These newly-released K Series pistons give 12.5:1 in the K24 and 11:1 in a sleeved K20.
The valve pockets are extremely deep at .235/.170 and will accommodate 36.5mm intake valves. Built for strength at 316g with .275 top land thickness. As with all Wiseco pistons this set has skirt coating, offset pins, XX rings and brushed dome. |
 At the core of each KraftWerks kit is a patented Rotrex traction drive supercharger, capable of over 200,000 RPM. The proprietary design allows the Rotrex supercharger to be lighter, smaller, quieter, cooler, and run at higher RPMs than all other competing superchargers - Resulting in superior efficiency, reduced emissions, and improved transient response. KraftWerks Supercharger kits offer a broader, more usable power than anything on the market. A broad power band makes for a better street/ race car, and demonstrates the superiority of the Rotrex design.
The KraftWerks kits have shown gains in excess of 100% across the entire power band and represent the pinnacle in forced air induction. |
 Offering extreme power AND indestructability, the Odyssey battery ingeniously uses absorbed glass mat (AGM) technology to offer, in one box, the characteristics of two separate batteries. It can deep cycle as well as provide enormous cranking power.
Capable of providing engine cranking pulses in excess of 2250A for 5 seconds as well as 400 charge/discharge cycles to 80% depth of discharge (DOD) which allows the Odyssey to provide both short duration high amperage pulse or low rate long duration drains.. A typical starting, lighting and ignition (SLI) battery can do one or the other, but not both. How is this possible? The answer begins with flat plates made of 99.99% pure virgin lead - not lead alloy. Pure lead plates can be made thinner, so we can fit more of them in the battery. More plates mean more plate surface area and more power - twice as much as conventional batteries.
In fact, ODYSSEY batteries are capable of providing engine cranking pulses in excess of 2250 amps for 5 seconds - double to triple that of conventional batteries, even at very low temperatures. And they can handle 400 charge-discharge cycles to 80% depth of discharge.The extreme combination of power and performance makes ODYSSEY batteries the perfect choice for the most demanding Honda/Acura enthusiast.
Features:
- 2, 3 or 4 year full warranty
- 12 year military design
- Drycell sealed technology
- 60% more cranking power
- Deep cycle design
- Mount in any position - any place
- Brass terminals, non-corrosive
- Steel jacket for severe use
|
 New from Spal USA is a line of electric cooling fans developed to improve airflow in high static pressure applications such as racing, performance street and engine swaps.
Spal fans offer unsurpassed CFM as well as minimal outside dimensions. Installation is a snap and requires the installation kit which is sold separately.
With the addition of Spal's Programmable Controller, the fan can be set to run even after the ignition is off to keep your engine cool after spirited street driving, or between runs at the strip. |
 IN STOCK NOW!
Designed to dramatically improve engine performance and increase horsepower by significantly reducing exhaust flow restriction, this Skunk2 piece is made from mandrel-bent aircraft quality 304 stainless steel and precision TIG welded. Features a sensor bung, heavy-duty flanges, and Skunk2 Racing acid-etched stainless steel badge. Ideal for highly modified N/A and Forced Induction applications. Mounting hardware and bung plug included. For off-road use only. |
| Page: 1 2 |
|
Headlines
8.22.2008
|
|
8.21.2008
|
|
8.20.2008
|
|
8.13.2008
|
|
8.11.2008
|
|
8.8.2008
|
|
8.5.2008
|
|
7.28.2008
|
|
7.28.2008
|
|
6.10.2008
|
|
5.7.2008
|
|
4.9.2008
|
|
3.28.2008
|
|
2.29.2008
|
|
2.12.2008
|
|
|
| |
|
 |
|
Copyright © 1998 - 2006 King Motorsports Unlimited, Inc.
|
Created by Solid Forge
|
